Introduction

Availability
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Manageability
Network manageable
Provides remote management of the UPS over the network.

Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial Connectivity
Provides management of the UPS via a serial port.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Serviceability
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Resettable circuit breakers
Enables a quick recovery from overload events.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Adaptability
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Features

UPS topology

Line-Interactive

Output power capacity

3 kVA

Output power

2700 W

Waveform

Sine

Input frequency

50/60 Hz

Output operation voltage (min)

208 V

Output operation voltage (max)

240 V

Output frequency regulation

50/60 Hz

Automatic Voltage Regulation (AVR)

Y

Surge energy rating

645 J

Hold time (min)

2 ms

Hold time (max)

10 ms

Efficiency

98.5%

Emergency Power Off (EPO)

Y

Noise level

55 dB

Surge protection

Y

Audible alarm(s)

Y

Auto-restart

Y

Ports & interfaces

AC outlet types

C13 coupler, C19 coupler

Power plug

C20 coupler

AC outlets quantity

9 AC outlet(s)

Number of output IEC jumpers

2

SmartSlot

Y

Battery

Battery technology

Sealed Lead Acid (VRLA)

Battery capacity

738 VAh

Typical backup time at full load

6.3 min

Typical backup time at half load

18 min

Battery life (max)

5 year(s)

Battery recharge time

3 h

Hot-swap battery

Y

Automatic battery test

Y

Design

Form factor

Rackmount/Tower

Rack capacity

2U

Cable length

2.44 m

Product colour

Black

LED indicators

Battery replacement

Certification

C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, FCC Part 15 Class A, GOST, IRAM, UL 1778, VDE, REACH, PEP, EOLI

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-15 - 45 °C

Operating relative humidity (H-H)

0 - 95%

Storage relative humidity (H-H)

0 - 95%

Operating altitude

0 - 3000 m

Non-operating altitude

0 - 15000 m

Technical details

Sustainability certificates

RoHS

Weight & dimensions

Width

432 mm

Depth

667 mm

Height

85 mm

Weight

37.3 kg

Package width

596 mm

Package depth

869 mm

Package height

85 mm

Package weight

45.4 kg

Packaging data

Rack mount kit

Y

Cables included

RS-232

Temperature sensor

Y

Manual

Y

Software CD

Y

Logistics data

Products per pallet

8 pc(s)

Other features

Nominal output voltage

230 V

Nominal input voltage

230 V

Packaging content

Web/SNMP Management Card