STARTECH.COM
Hdmi Over Cat5 Extender Power Cable Rs232 Ir Ethernet - 100m

Hdmi Over Cat5 Extender Power Cable Rs232 Ir Ethernet - 100m

Part Number:
ST121HDBT5
Stock:
Last Updated on:
Stock ETA
Real time Stock Check

Introduction

Extend an HDMI signal by up to 330ft (100m) over CAT5/CAT6 cable, with 10/100 network, infrared, serial control, and Power over Cable

The StarTech.com HDBaseT Extender Kit, extends HDMI up to 330 feet (100 Meters) over a single CAT5e or CAT6 cable. The extender supports Ultra HD and Full HD resolutions (4K / 1080p) with support for 3D and the accompanying 7.1 digital audio. For added versatility, both the transmitter and receiver can be powered from one power source using Power Over Cable (POC). The versatility of this video extender makes it an ideal solution for digital signage applications in large buildings such as commercial shopping centers, stadiums, schools, and hospitals.

What is HDBaseT?

HDBaseT is a standardized, zero latency, video distribution technology that's revolutionizing HDMI distribution. HDBaseT uses an advanced method of modulation that enables you to distribute uncompressed HDMI audio and video along with additional signals such as 100BaseT Ethernet, IR, RS-232 serial and power over cable.

Extend More than Video with HDBaseT

The extender offers HDBaseT technology with HDMI, IR, RS232, Ethernet, and power in a single extender kit, for complete end-to-end control. Offering greater versatility than traditional HDMI extenders or HDMI cabling alone HDBaseT is the clear choice for every integrator and system designer. The IR extension enables you to operate your display and an IR-enabled source device, such as a Blu-ray player or TV Set top box, from either end of your extension. RS232 control let you to connect a serial I/O device at your display - an ideal solution for adding a serial touch screen interface to your remote display for interactive digital signage presentations. While the built-in 6-Port Ethernet hub lets you connect 5 IP devices to your network (3 remote, 2 local).

Astonishing Picture Quality at 295 Feet Away

With the A/V industry adopting 4K as its new high-resolution standard, long-range video distribution can be difficult, especially considering the 4K distance limitations on standard HDMI cables. You'll be amazed at how this HDBase-T extender kit can deliver your 4K video signal at up to 295 ft. away from your video source.

The extender kit is also backward compatible with 1080p at 330 feet (100 m), so you can comfortably use it to make any video source look great.

Hassle-free, Professional Installation with a Single Cable

This extender has been specially crafted for a smooth, tidy setup. HDBaseT technology allows for single cable installation, for seamless integration using existing CAT5e or CAT6 infrastructure, avoiding the hassle of running multiple cables, while reducing potential failure points. Plus, the added benefit of power over cable means you'll only need one power source to power both your extender and receiver, great for extending to areas where power outlets may be limited. Mounting hardware is also included for both the extender and receiver for discrete, professional mounting.

The ST121HDBT5 is TAA compliant and backed by a StarTech.com 2-year warranty with free lifetime technical support.

The StarTech.com Advantage

- Save cost by extending HDMI, Ethernet, RS-232, IR, and Power over a single Cat5 cable, using HDBaseT technology
- Astonishing picture quality with support for UHD 4K resolutions at up to 295 ft. (90 m)
- Supports HD 1080p resolutions at up to 330 ft. (100 m)

Features

Type

AV transmitter & receiver

Maximum resolution

4096 x 2160 pixels

Cable types supported

Cat5,Cat6

Maximum transfer distance

100 m

Maximum refresh rate

60 Hz

Audio system

Multichannel

Audio output channels

7.1 channels

LED indicators

LAN, Status

Supported video modes

720p,1080p

Supported graphics resolutions

1280 x 720 (HD 720),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA),2560 x 1600 (WQXGA),3840 x 2160,4096 x 2160

Remote control type

IR

Material

Aluminium

Rack mounting

Y

Daisy chain

N

Rubber feet

Y

Product colour

Black

Certification

FCC, CE, TAA, HDBT, REACH

Ports & interfaces

Connectivity technology

Wired

Wi-Fi

N

Bluetooth

N

Near Field Communication (NFC)

N

Ethernet LAN

Y

RJ-45 input ports

4

RJ-45 output ports

4

HDMI in

1

Number of HDMI outputs

1

RS-232 input ports

1

RS-232 output ports

1

Serial ports quantity

2

Serial interface type

RS-232

Remote (IR) input

2

Remote (IR) output

2

DC-in jack

Y

Power

AC input voltage

100-240 V

Operating voltage

12 V

Input current

0.5 A

Output current

1.5 A

Power consumption (typical)

18 W

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-10 - 60 °C

Operating relative humidity (H-H)

0 - 80%

Weight & dimensions

Receiver dimensions (WxDxH)

89 x 139 x 37 mm

Receiver weight

859 g

Transmitter dimensions (WxDxH)

89 x 139 x 37 mm

Transmitter weight

859 g

Packaging data

Package width

179 mm

Package depth

313 mm

Package height

74 mm

Package weight

1.64 kg

Packaging content

AC adapter included

Y

Manual

Y

IR blaster included

Y

IR receiver included

Y

Mounting brackets included

Y

Grounding wire

Y

Mounting kit

Y

Technical details

Sustainability certificates

RoHS

No options for this product
.